Big wine drinker? Have old cork coasters lying around? Well, save those corks because we have found 10 more ingenious ways to use them all around your house. Who knew something so simple can be so versatile!
1. Cork Magnets
Gather some magnet strips, a knife, glue, and some wine corks. Cut corks in half lengthwise and them apply adhesive on each magnet strip. Press firmly onto the flat side. And that’s all.
2. Drawer Knobs
Gather up some champagne corks, screws, and a screw driver. Remove existing drawer knobs and replace them with your pointed screws. Hold a screw in place with a screwdriver. Next, firmly press a champagne cork against the screw and twist in a clockwise motion. Do the same for all the drawers. Your new drawer knobs are ready.
You’ll need to gather up some potting soil, a puncher, paring knife, magnets and tiny succulents. Cut a hollow shape in the center of each cork. Attach magnets into each cork by pushing hard. Next, fill the hollow hole with soil and then place a tiny succulent inside each one. Add a few drops of water and attach the planters to a metal surface.
4. Jewelry Frame
Looking for ways to arrange your jewelry neatly? All you need is a frame that you like. Paint it. Cut out corks in long circular sizes and fuse into the frame. If you want to personalize it some more, you can wrap the corks in your favorite fabric.
All you need are cork tiles, white paint and brush, painter’s tape, and picture hanging strips. Apply the tape to the corks and proceed to make stripes. Next, arrange tiles in a pattern and then start painting. Finally, remove the tape and there you have it.
6. Mouse pad
All you have to do is cut cork to size then bond them together on top of a piece of thick cork paper. It’s better to keep it simple but you can design any shape you wish.
7. Cork Wall
Have you been looking for ways to spice up your kitchen? Is your kitchen backsplash too ordinary? Well no more. All you need is a piece of wood cut out to the exact size of the area you wish to cover up. Next, start gluing half-cut corks onto piece of wood until every inch is covered. You can opt to either try a pattern design or simply fasten them in a row formation. When the wood is completely covered, attach it to the wall and voila!
8. Pencil Holder
You’ll need a power drill, cork trivets, and glue. Stick trivets on top of each other and press firmly. Next, using your drill bit, drill out holes and fill each hole with a writing device.
You will need A LOT of wine and champagne corks. All you have to do is simply gather all your corks and enclose them in a breathable and durable mesh fabric.
10. Cork Stamps
Why not make cute and unique stamps with your corks? All you’ll need is a good knife, a sharpie and a bunch of corks. Next, draw whatever design you want and then simply cut around it and slowly chip away any excess wood. Use ink and fill in your designs and voila!